APC AR2901 Specifications download pdf (Page 8)

DC diskontcomputer.com GmbH

Traunuferstrasse 110

4052 Ansfelden, Austria

:: Seite 8 von 35 :: Datenblatt zum Produkt APC APC NetShelter VL 42U 600mm Wide x 1070mm no Sides Black mit DC# 473794 ::

Fragen zu dem Produkt? Kein Problem - wir helfen Ihnen per eMail ([email protected]) gerne weiter!

Den aktuellen Preis und Lagerstand finden Sie online auf http://www.diskontcomputer.com/detail.php?item=473794

NetShelter VL Enclosure—Unpacking, Installation, and Customization 4

Unpacking

Unpacking the enclosure

Heavy: Use at least two people to unpack the enclosure.

Warning: To prevent the enclosure from tipping over after installation:

• Stabilize the enclosure before installing the components. See “Rack stabilization

options” on page 9.

• Do not extend components on sliding rails out from the enclosure until you have

installed three or more pieces of similar equipment, or the stabilizer plate or bolt-down

brackets are installed. See “Rack stabilization options” on page 9.

• Do not extend more than one component from the enclosure at a time.

• Load the heaviest components first, and place them toward the bottom of the enclosure to

prevent the enclosure from becoming top-heavy.

• Use caution when moving an empty enclosure on its casters (not provided); the enclosure

may be unstable when pushed or pulled from the side. Push the enclosure from the front or

back when moving it on its casters. For extra stability, load 159 kg (350 lb) of equipment

into the bottom of the enclosure before moving it on its casters.

1. Move the shipping pallet to a firm, level surface in an open area. Inspect the enclosure for visible

signs of shipping damage. If you detect shipping damage, contact APC Customer Support at the

number listed on the yellow label on the front of the enclosure or on the APC Web site,

www.apc.com.

2. See the label on the packaging to determine where to cut the wrapping. Using sturdy shears or a

utility knife, carefully remove the plastic stretch wrap surrounding the enclosure.

Note: Save the bag containing the warranty card and installation manual.

3. Remove the four cardboard corner protectors.

4. Remove the two pallet-mounting brackets that anchor the enclosure to the shipping pallet, using a

13-mm wrench (not provided).

Note: Save the pallet-mounting brackets if you plan to bolt the enclosure to the floor.

See “Rack stabilization options” on page 9.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 34 35

No comments

APC AR2901 Specifications Page 8