APC AP5202 User's Guide download pdf (Page 15)

®®

USER’S GUIDE

kvm switch

SET QUICK VIEW

PORTS

Quick View ports allow users to scan and view selected

ports, saving time for a large installation base.

To select which ports are included as Quick View ports,

select or deselect a port by either double-clicking the port or

moving the highlight bar to the port and pressing

ENTER. An

arrowhead in the QV column on the main menu list,

indicates ports selected as Quick View.

Setting a port as a Quick View port causes the following:

• If a user selects either the QVIEW or QVIEW + POWER

ON options for LIST (F2), only those ports selected as

Quick View appear in the main menu list.

• If a user selects either the QVIEW or QVIEW + POWER

ON options for SCAN/SKIP MODE, only those ports

selected as Quick Views are auto-scanned.

SET ACCESSIBLE

PORTS

You can determine user access to connected computers on

a port-by-port basis:

• F (full access) default

• V (view only)

• Blank (no access): The port does not display on the user’s

main menu list.

To set user access, select the target port, and press the

SPACEBAR to cycle through each selection (F, V, blank).

Repeat for all user access rights, and press

ENTER when

finished.

RESET STATION IDS If you change a KVM station position in the serial

connection, OSD settings no longer correspond with the

position. Use this function to re-scan KVM station position

and update the OSD.

OTE: Only KVM station numbers update. You must reset

all administrator settings for all KVM stations affected by the

change. Port names are not affected.

FIRMWARE UPGRADE Activate Firmware Upgrade mode to upgrade the KVM

Switch’s firmware.

Main Option Description

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 39 40

No comments

APC AP5202 User's Guide Page 15