19Symmetra MW II with Internal Bypass Static Switch - Operation - 990-1756C-001
5. Configure the Remote Monitoring Service
Settings screen. The APC Remote Monitoring
Service (RMS) is an APC professional service
which securely monitors the customer’s
Network-Critical Physical Infrastructure
(NCPI) from a remote 24x7 operation center,
responding to events according to a pre-
defined customer escalation procedure. Go to
http://rms.apc.com to learn more about this
service.
The APC Remote Monitoring Service uses the
HTTP protocol to post information to its
database. If a proxy server is used for Internet
connection, then the required proxy server port settings must be specified (a proxy server acts as
an agent between a workstation user or other networked device and the Internet to regulate
security, administrative control and caching).
Note: The APC Remote Monitoring Service (RMS) will not be activated until the RMS Team
has been contacted. The contact details can be found at http://rms.apc.com.
– Enable APC RMS: Select this checkbox to start using the service. Once selected, information
about your UPS will periodically be sent to APC’s Remote Monitoring Service.
– Use Proxy: Select this checkbox if the Internet connection method uses a HTTP proxy server
to connect to the Internet.
– Proxy server address: Enter the fully qualified IP-address or fully qualified domain name of
the proxy server. If you do not know the server address or port number, contact your network
administrator.
– Proxy server port: Enter the port number of the proxy server.
– Use authentication: Select this checkbox if the proxy server requires a login. Then specify a
Proxy server login (user name) and a Proxy server password.
–Press Apply Changes to complete the changes and select arrow down to go to the next
Network Configuration screen.
Comments to this Manuals