2 UPS Network Management Card 2 User’s Guide
Local access to the command line interface
For local access, use a computer that connects to the Network Management Card through the serial port to
access the command line interface:
1. Select a serial port at the computer and disable any service that uses the port.
2. Connect the provided serial cable (part number 940-0299) from the selected port on the computer to the
configuration port at the NMC.
3. Run a terminal program (e.g., HyperTerminal), and configure the selected port for 9600 bps, 8 data bits,
no parity, 1 stop bit, and no flow control.
4. Press
ENTER. At the prompts, enter your user name and password.
Main Screen
Sample main screen
Following is an example of the screen displayed when you log on to the command line interface at the Network
Management Card (NMC).
Information and status fields
Main screen information fields.
• Two fields identify the American Power Conversion operating system (AOS) and application (APP)
firmware versions. The application firmware name identifies the device that connects to the network
through this NMC. In the example above, the NMC uses the application firmware for a Symmetra UPS.
Network Management Card AOS vx.x.x
Symmetra APP vx.x.x
• Three fields identify the system name, contact person, and location of the NMC.
Name : Test Lab
Contact: Don Adams
Location: Building 3
American Power Conversion Network Management Card AOS vx.x.x
(c)Copyright 2013 All Rights Reserved Symmetra APP vx.x.x
--------------------------------------------------------------------------
Name : Test Lab Date : 10/30/2010
Contact : Don Adams Time : 5:58:30
Location : Building 3 User : Super User
Up Time : 0 Days, 21 Hours, 21 Minutes Stat : P+ N+ A+
APC>
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals