APC AP8868 User's Guide download pdf (Page 37)

Metered Rack PDU User Guide29

user

Access: Administrator only

Description: Configure the user name, password, and inactivity timeout for the Administrator, Device

User, and Read-Only User account types. For information on the permissions granted to each account

type, see “Types of User Accounts” on page 2.

Example 1: To change the Administrator user name to XYZ, type:

user -an XYZ

Example 2: To change the log off time to 10 minutes, type:

user -t 10

web

Access: Administrator only

Description: Enable access to the Web interface using HTTP or HTTPS.

For additional security, you can change the port setting for HTTP and HTTPS to any unused port from

5000 to 32768. Users must then use a colon (:) in the address field of the browser to specify the port

number. For example, for a port number of 5000 and an IP address of 152.214.12.114, type:

http://152.214.12.114:5000

Example: To prevent all access to the Web interface, type:

web -S disable

Option Argument Description

-an

-dn

-rn

<read-only name>

Set the case-sensitive user name for each account type. The maximum

length is 10 characters.

-ap

-dp

-rp

<read-only password>

Set the case-sensitive password for each account type. The maximum

length is 32 characters. Blank passwords (passwords with no characters)

are not allowed.

-t <minutes> Configure the time (3 minutes by default) that the system waits before

logging off an inactive user.

Option Argument Definition

-S disable | http | https Configure access to the Web interface. When HTTPS is enabled, data is

encrypted during transmission and authenticated by digital certificate.

-ph <http port #> Define the TCP/IP port used by HTTP to communicate with the Rack

PDU (80 by default).

-ps <https port #> Define the TCP/IP port used by HTTPS to communicate with the Rack

PDU (443 by default).

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 103 104

No comments

APC AP8868 User's Guide Page 37