APC AP8868 User's Guide Page 89
- Page / 104
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
Metered Rack PDU User Guide81
Run the Wizard to perform the configuration. To discover and configure the unconfigured Rack
PDUs or network-enabled devices over the network:
1. From the Start menu, launch the Wizard. The Wizard detects the first Rack PDU or network-
enabled device that is not configured.
2. Select Remotely (over the network), and click Next >.
3. Enter the system IP, subnet mask, and default gateway for the Rack PDU or device identified by
the MAC address. Click Next >.
On the Transmit Current Settings Remotely screen, if you check-mark Start a Web browser
when finished, the default Web browser connects to the Rack PDU or device after the Wizard
transmits the settings.
4. Click Finish to transmit the settings. If the IP address you entered is in use on the network, the
Wizard prompts you to enter an IP address that is not in use. Enter a correct IP address, and click
Finish.
5. If the Wizard finds another unconfigured Rack PDU or device, it displays the screen to enter
TCP/IP settings. Repeat this procedure beginning at step 3, or to skip the Rack PDU or device
whose MAC address is currently displayed, click Cancel.
Configure or reconfigure the TCP/IP settings locally
1. Contact your network administrator to obtain valid TCP/IP settings.
2. Connect the provided serial configuration cable (APC part number 940-0144A) from an available
communications port on your computer to the serial port of the Rack PDU or device. Make sure
no other application is using the computer port.
3. From the Start menu, launch the Wizard application.
4. If the Rack PDU or network-enabled device is not configured, wait for the Wizard to detect it.
Otherwise, click Next >.
5. Select Locally (through the serial port), and click Next >.
6. Enter the system IP, subnet mask, and default gateway for the Rack PDU or device, and click
Next >.
7. On the Transmit Current Settings Remotely screen, if you select Start a Web browser when
finished, the default Web browser connects to the Rack PDU or device after the Wizard transmits
the settings.
8. Click Finish to transmit the TCP/IP settings. If the IP address you entered is in use on the
network, the Wizard prompts you to enter an IP address that is not in use. Enter a correct IP
address, and click Finish.
9. If you selected Start a Web browser when finished in step 6, you can now configure other
parameters through the Web interface of the Rack PDU or device.
- User Guide 1
- Contents 2
- Introduction 9
- Types of User Accounts 10
- Watchdog Features 11
- Network Port Sharing 11
- Getting Started 12
- Establish Network Settings 13
- Option 43 = 01 04 31 41 50 43 14
- 01) is the code 14
- 04) is the length 14
- Command Line Interface 15
- 8Metered Rack PDU User Guide 16
- Rack PDU Front Panel 17
- Item Function 18
- Display Tree Example 1 19
- Display Tree Example 2 20
- Network Status LED 21
- 10/100 LED 21
- Load indicator LED 21
- About the Main Screen 23
- Command Syntax 25
- Command Response Codes 26
- Metered Rack PDU User Guide19 27
- 20Metered Rack PDU User Guide 28
- Access: Administrator only 29
- 22Metered Rack PDU User Guide 30
- Metered Rack PDU User Guide23 31
- 24Metered Rack PDU User Guide 32
- Metered Rack PDU User Guide25 33
- 26Metered Rack PDU User Guide 34
- Metered Rack PDU User Guide27 35
- 28Metered Rack PDU User Guide 36
- Metered Rack PDU User Guide29 37
- Access: Administrator only 38
- 32Metered Rack PDU User Guide 40
- Metered Rack PDU User Guide33 41
- 34Metered Rack PDU User Guide 42
- Metered Rack PDU User Guide35 43
- 36Metered Rack PDU User Guide 44
- Metered Rack PDU User Guide37 45
- 38Metered Rack PDU User Guide 46
- Administrator, Device User 47
- Web Interface 48
- URL address formats 49
- Web Interface Features 50
- Quick Links 51
- Other Web interface features 51
- 44Metered Rack PDU User Guide 52
- Metered Rack PDU User Guide45 53
- About the Home Tab 54
- Device Management 55
- Resetting Peak Load and kWh 56
- Environment 57
- Use the Event and Data Logs 58
- Metered Rack PDU User Guide51 59
- Data log 60
- Metered Rack PDU User Guide53 61
- 54Metered Rack PDU User Guide 62
- Administration: Security 63
- 56Metered Rack PDU User Guide 64
- Configure the RADIUS Server 65
- Inactivity Timeout 66
- TCP/IP settings 67
- DHCP response options 68
- Port Speed 69
- Ping Response 69
- 62Metered Rack PDU User Guide 70
- Metered Rack PDU User Guide63 71
- Console 72
- 66Metered Rack PDU User Guide 74
- Metered Rack PDU User Guide67 75
- FTP Server 76
- Administration: Notification 77
- 70Metered Rack PDU User Guide 78
- E-mail notification 79
- Setting Description 80
- SNMP traps 81
- SNMP Trap Test 81
- Remote Monitoring Service 82
- Syslog settings 83
- Identification 84
- Set the Date and Time 84
- Use an .ini File 85
- Reset the Rack PDU 86
- Configure Links 87
- About the Rack PDU 87
- Use the Wizard 88
- Metered Rack PDU User Guide81 89
- Summary of the procedure 90
- Contents of the .ini file 90
- INI and Network Port Sharing 90
- Detailed procedures 91
- 84Metered Rack PDU User Guide 92
- Related Topics 93
- File Transfers 94
- Metered Rack PDU User Guide87 95
- 88Metered Rack PDU User Guide 96
- Metered Rack PDU User Guide89 97
- 90Metered Rack PDU User Guide 98
- Last Transfer Result codes 99
- Troubleshooting 100
- Metered Rack PDU User Guide93 101
- 94Metered Rack PDU User Guide 102
- Device Command Descriptions 103
- 990-3429D-001 104
Related products and manuals for Power distribution units (PDUs) APC AP8868
(16 pages)© 2020, manymanuals.com. All rights reserved. | 0.369 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals