APC Rack PDU, Metered, Zero U, 5.7kW, 120V User's Guide download pdf (Page 16)

12 Metered Rack Power Distribution Unit

Local access to the control console

You can use a local computer to connect to the

PDU to access the control console.

1. Select a serial port at the local computer, and

disable any service which uses that port.

2. Use the serial cable (940-0144) to connect the

selected port to the serial port on the front

panel of the PDU.

3. Run a terminal program (such as

HyperTerminal

) and configure the selected

port for 9600 bps, 8 data bits, no parity, 1 stop

bit, no flow control, and save the changes.

4. Press

ENTER to display the User Name

prompt.

5. Use apc for the user name and password.

6. See “Control console” on page 14 to finish the

configuration.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 27 28

No comments

APC Rack PDU, Metered, Zero U, 5.7kW, 120V User's Guide Page 16