APC Rack PDU, Metered, Zero U, 5.7kW, 120V User's Guide download pdf (Page 17)

Metered Rack Power Distribution Unit 13

Remote access to the control console

From any computer on the same subnet as the

PDU,

you can use ARP and Ping to assign an IP address

to the

PDU, and then use Telnet to access that

PDU’s control console and configure the needed

TCP/IP settings.

1. Use ARP to define an IP address for the

PDU,

and use the

PDU’s MAC address in the ARP

command. For example, to define an IP

address of 156.205.14.141 for the

PDU that has

a MAC address of 00 c0 b7 63 9f 67, use one

of the following commands:

Windows command format:

arp -s 156.205.14.141 00-c0-b7-63-9f-67

LINUX command format:

arp -s 156.205.14.141 00:c0:b7:63:9f:67

2. Use Ping with a size of 113 bytes to assign the

IP address defined by the ARP command. For

example:

Windows command format:

ping 156.205.14.141 -l 113

LINUX command format:

ping 156.205.14.141 -s 113

3. Use Telnet to access the PDU at its newly

assigned IP address. For example:

telnet 156.205.14.141

4. Use apc for both user name and password.

5. See “Control console” on page 14 to finish the

configuration.

Note

After the PDU has its IP address

configured, you can use Telnet,

without first using ARP and Ping, to

access that

PDU.

Note

The MAC address is on the back of the

PDU and on the Quality Assurance slip

included in the package.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 27 28

Comments to this Manuals

No comments

APC Rack PDU, Metered, Zero U, 5.7kW, 120V User's Guide Page 17

Comments to this Manuals

Related products and manuals for Power distribution units (PDUs) APC Rack PDU, Metered, Zero U, 5.7kW, 120V