APC 1000XL VA Specifications download pdf (Page 8)

Smart-UPS C 1000/1500 VA 120/230 Vac Rack-Mount 2U 7

Display interface features

1000/1500 VA

120 Vac

1000I/1500I VA

230 Vac Description

On Line: The UPS is supplying conditioned AC power to connected

equipment.

Green mode: The UPS is operating at the most efficient level by bypassing

unused AVR components while acceptable AC voltage is present. The UPS will

enter and exit Green mode automatically and will not compromise power

protection.

Load Capacity: The load capacity percentage is indicated by the number of

load bar sections illuminated. Each bar represents 20% of the load capacity.

Estimated Run Time / Min: This indicates the battery runtime minutes that

remain if the UPS switches to battery power.

Battery Charge: The battery charge level is indicated by the number of load

bar sections illuminated. When all five blocks are illuminated, the battery is

fully charged. Each bar represents 20% of the battery charge capacity.

Overload: The equipment connected to the UPS is drawing more power than

the voltage rating allows.

Event: The event counter indicates the number of events that occurred to cause

the UPS to switch to battery operation.

Automatic Voltage Regulation (AVR): The UPS has an AVR boost feature

that automatically regulates low levels of input voltage without using battery

power. The 230 Vac model has an additional AVR trim feature that regulates

high levels of input voltage. When the 120 Vac AVR icon is illuminated, the

UPS is compensating for low input voltage whereas with the 230 Vac, the

following happen:

When illuminated, the UPS is compensating for low input voltage.

When illuminated, the UPS is compensating for high input voltage.

In: Input voltage.

Out: Output voltage.

System Faults: An internal system fault has occurred. The fault number will

illuminate on the display. Refer to Display interface features on page 7.

Mute: An illuminated line through the icon indicates that the audible alarm is

disabled.

Battery Fault: The icon will flash to indicate that the battery is disconnected.

When the icon remains continuously illuminated the UPS has failed a Self-Test

or the battery is near the end of its service life and should be replaced.

Refer to LCD status indicators on page 6.

On Battery: The UPS is supplying battery backup power to the connected

equipment.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Comments to this Manuals

No comments

APC 1000XL VA Specifications Page 8

Comments to this Manuals

Related products and manuals for Power supply units APC 1000XL VA