APC AP9215 Specifications download pdf (Page 17)

Cable Management Tray Kit

The Cable Management Tray Kit ships with qty 2 Trays that provide enhanced cable management within the

NetShelter enclosure. Measuring 69” high x 3” wide (175cm x 7.6cm) the Cable Management Tray can be mounted in

the side of the NetShelter enclosure. Qty. 10 Velcro straps are provided to assist in routing cables.

Cable Management Arm

APC’s Cable Management Arm is a 1U hinged device that allows users to attach cables and power cords so that

they remain fixed and out of the way of APC’s Sliding Shelves (p/n AR8123 and p/n AR8128), the 19" Rotating

Keyboard Drawer (p/n AR8127), and the 17” Keyboard Drawer (p/n AR8126).

Fan Tray Kit

For increased ventilation of your network equipment, roof-mounted fan trays are available in 120V or 220V versions.

Each tray contains four fans (rated 110 cfm each) and easily mounts in the roof of the NetShelter Enclosure taking

up zero “U” space.

Compaq Mounting Rails

Consists of four (4) pairs of rails for mounting some Compaq ProLiant servers, storage systems, and some Compaq

accessories. For more details, see the NetShelter Server Compatibility chart on APC’s Web site.

HP NetServer Mounting Rails

Consists of one (1) pair of mounting rails to mount some HP NetServers. Appropriate HP rack-mount kit may also

be required. For more details, see the NetShelter Server Compatibility chart on APC’s Web site.

Dell PowerEdge Mounting Rails

These kits consist of mounting hardware required for installing Dell’s PowerEdge servers into the NetShelter

enclosures. For the 4350 or 6350 server, use APC p/n AR8002. For the 4300 or 6300 server, use APC p/n AR8003.

For the 2400 or 2450 Server, use APC p/n AR8004. APC’s Cable Management Arm (APC p/n AR8129) is included in

AR8002 and AR8003 kits. AR8002, AR8003, and AR8004 also require the Dell provided rack-mount kit. However,

when mounting the Dell 2450 server, the Dell provided kit is NOT required. (See Compatibility Chart for further details)

19”Rotating Keyboard Drawer

Utilising 2U of rack space, the 19” beige rotating keyboard drawer provides users with a hassle-free way to use a

standard 19” keyboard in any standard EIA-310-D 19” rack. A foam wrist rest and mousepad are included in the drawer.

Cable management clips and mounting provisions for APC’s Cable Management Arm (p/n AR8129) are also provided.

(keyboard not included)

17”Keyboard Drawer

This 1U, low profile, beige keyboard drawer will house standard 17” keyboards. The 4-Post mounted rails are

adjustable in depths from 27.6” (70cm) to 32.8” (83cm) and allow a 1U device to be mounted behind the keyboard

tray without interfering with its operation. A foam wrist rest and mounting provisions for APC’s Cable Management

Arm (p/n AR8129) are provided. (keyboard not included)

Blanking Panel Kit

This kit contains one each of the following: 1U panel, 2U panel, 4U panel, and 8U panel. Blanking panels hide unused

enclosure space, improve aesthetics, and are essential for proper airflow in the enclosure. The panels are powder

coated in a beige color for an attractive finish.

Hardware Kit

This kit contains 32 sets of caged nuts, nylon cup washer, and combination slot/Phillips screw for use in addition to

the hardware already provided with each NetShelter enclosure.

Part Number AR8000

Part Number AR8001

Part Number AR8127

Part Number AR8101

Part Number AR8100

Part Number AR8210-120V

Part Number AR8211-220V

NetShelter Enclosure Accessories

Part Number AR8114

Part Number AR8129

Part Number AR8002, AR8003, AR8004

Part Number AR8126

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 23 24

Comments to this Manuals

No comments

APC AP9215 Specifications Page 17

Comments to this Manuals

Related products and manuals for Power supply units APC AP9215