APC AP9290 Datasheet download pdf (Page 102)

USER’S GUIDE

Vertical Console Port Server

Firmware file transfer methods

You can transfer the latest firmware to a VCPS using one of the following

methods:

• Upload the firmware to a VCPS using FTP or SCP.

• Download the firmware from an FTP server (if your company or agency

has a centralized FTP server from which to obtain firmware).

Instructions for using FTP or SCP. For you to be able to use FTP or SCP

to upgrade a single VCPS over the network:

• The VCPS must be connected to the network.

• The FTP or SSH server must be enabled at the VCPS.

• The VCPS must have its TCP/IP settings (System IP, Subnet Mask,

and Default Gateway addresses) configured.

Upload firmware to a VCPS

To upload firmware to a VCPS after you download it from the APC Web site:

1. Open a command prompt window on a computer that is connected to

the network. Go to the directory that contains the firmware upgrade

files, and list the files. For the directory C:\apc, the commands would

be those shown in bold:

C:\>cd apc

C:\apc>dir

The file listed for a VCPS, for example, might be the following:

–apc_hw10_vcps_100_623.bin

2. Open an FTP client session:

C:\apc>ftp

To use SCP, skip to step 7.

1 2 ... 97 98 99 100 101 102 103 104 105 106 107 ... 112 113

No comments

APC AP9290 Datasheet Page 102