APC AP9290 Datasheet download pdf (Page 26)

USER’S GUIDE

Vertical Console Port Server

Using Base Port

You can use Telnet/SSH to directly access a VCPS serial port using the

base TCP port.

The base TCP port default is 9000. You can change the base port setting

using the cps set command in the CLI to any unused TCP port from 5000

to 65493.

If you use Telnet to directly access a serial port, the following command

would connect you directly to the server or device connected to port 5 on

the VCPS at the IP address 157.204.7.12.

telnet 157.204.7.12 9005

If you use SSH to directly access a serial port, the following command

would connect you directly to the server or device connected to port 5 on

the VCPS at the IP address 157.204.7.12.

When you use the base port to directly access a server or

device, first enter your user name (login) and password for the

CLI and then your user name (login) and password specific to

the device.

If the VCPS uses a non-default port number (between 5000 and

65493), include a colon or a space (depending on your SSH

client) between the IP address and the port number.

No comments

APC AP9290 Datasheet Page 26