APC AR2400 User Manual download pdf (Page 10)

NetShelter SV User Manual4

Unpacking

1. Move the shipping pallet to a firm, level surface.

2. Inspect for visible signs of shipping damage. If damage has been detected, contact Schneider

Electric Customer Support using the contact information on the back cover of this manual.

3. Remove the plastic stretch wrap, cardboard corners, and polyethylene bag surrounding the

equipment.

4. Use the Torx T30/#2 Phillips wrench (provided) and 13 mm wrench (not provided) to remove the

four pallet mounting brackets. Save these mounting brackets if you plan to bolt the cabinet to the

floor.

5. Carefully roll the equipment off the pallet and onto the floor.

WARNING

TIP HAZARD

This cabinet is easily tipped. Use extreme caution when unpacking or moving.

• Use at least two people to unpack and move the cabinet.

• Before moving the cabinet on its casters, load 158 kg (350 lbs) of equipment into the

bottom of the cabinet for extra stability.

• When moving on its casters, make sure the leveling feet are up and push the cabinet

from the front or rear.

Failure to follow these instructions can result in death, serious injury, or

equipment damage.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 33 34

No comments

APC AR2400 User Manual Page 10