APC AR2800BLK Datasheet download pdf (Page 24)

20 NetShelter VS Enclosure

Horizontal Braces

Each side of the enclosure has two horizontal braces between the vertical frame posts. These

adjustable braces support the vertical mounting rails and can be used to manage cables.

How to move a brace

1. Use the 5-mm hex wrench (provided) to remove the four hex-head screws that are holding the

brace to the frame posts.

2. Remove the caged nuts from the frame post.

3. Locate the new position for the brace and secure the brace to the frame posts:

a. Insert a caged nut into the appropriate holes at the new position on the frame posts.

b. Place the brace at the new position and insert a hex-head screw through the brace, frame post,

and caged nut. Tighten the screw.

See “How to install and remove caged nuts” on page 21.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 39 40

No comments

APC AR2800BLK Datasheet Page 24