APC AR2800BLK Datasheet download pdf (Page 33)

NetShelter VS Enclosure 29

How to Connect Enclosures Together

Make the front connections

The first step when connecting enclosures

together is to slide the enclosures together and

align. Make sure that the holes in the baying

brackets are aligned with the holes in the baying

trim. The connection procedure varies according

to your row configuration: 24-inch or 600-mm

centers. When you are joining enclosures

configured on 24-inch centers, align using

hole

. When joining enclosures configured on

600-mm centers, align using hole

Make sure that the enclosures are level with each

other.

Insert a low-profile screw through the baying trim into each of the two brackets and tighten using the

3-mm hex wrench.

Make the rear connections

When joining enclosures configured on 24-inch centers, use hole

. When joining enclosures

configured on 600-mm centers, use hole

Insert a low-profile screw through the

baying plate and into the threaded hole in

the frame. Tighten using the 3-mm hex

wrench.

See “How to level the enclosure” on page 9.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 39 40

No comments

APC AR2800BLK Datasheet Page 33