APC NBRK0320E Datasheet download pdf (Page 133)

Advanced View: Configuring Appliances

124 Using Your Appliance

The following controls appear in the Advanced pane:

The following controls and data appear in the Status pane:

Field Description

LCP - Send LCP echo requests to

peer

When this check box is checked, your appliance will send

LCP echo requests, allowing PPP to know that the PPP link

is active even when there is no network traffic.

Exclusive route - Route all data

through PPP when dialed-out

If this check box is checked, all data will be routed via the

PPP interface during PPP dial out sessions.

When this check box is not checked, the Ethernet interface

will be used for communication with hosts that are on the

same subnet as the appliance. However, all communication

with hosts not on the same subnet as the appliance will be

carried out using the PPP interface.

Debug - Send debug messages to

syslog

When checked, debug messages will be forwarded to the

syslog host specified in the Log task (for more information

see “Log” on page 116).

SIM PIN / Confirm SIM PIN For modems that use a SIM (subscriber identification

module), specify the PIN that is used to unlock the SIM.

Note: A SIM may or may not require a PIN in order to

function. For modems that do not have a SIM this field must

be blank.

Extra Initialization Commands If necessary, type additional initialization commands that

will be appended to the commands noted in the Initialization

commands field here.

Use default modem commands Check this check box to use the default modem initialization

string for your modem.

Initialization commands If necessary, edit the initialization string used for your

modem here.

E-mail Addresses for IP Address

Notification

When a PPP connection is established, an e-mail continuing

the IP address that has been assigned to the appliance will be

sent to all e-mail addresses listed in this field. To add

addresses to this field, click Add, type an address in the E-

mail Address field, and then click OK.

Field Description

Modem Status Shows the current status reported by the modem to which

the appliance is connected.

Hostname The hostname being used to identify the PPP interface. Note

that this will only show a hostname if you configured one in

the Hostname field in the Basic pane.

IP Address / Subnet Mask The IP address and subnet mask that has been assigned to

the appliance by the PPP Gateway.

Gateway Shows the IP address of the PPP Gateway.

1 2 ... 128 129 130 131 132 133 134 135 136 137 138 ... 209 210

Comments to this Manuals

No comments

APC NBRK0320E Datasheet Page 133

Comments to this Manuals

Related products and manuals for Racks APC NBRK0320E