APC SU24R2XLBP Datasheet download pdf (Page 14)

Connect the Battery Pack(s) to the Smart-UPS

Battery pack connectors are color coded and keyed to prevent improper

connection. The color of the connector on the UPS must match the color of the

battery pack connector.

Allow the battery pack to charge for 24 hours. Do not expect full run time during this

initial charge period.

Refer to About Your Battery Pack, page 3, for the type of UPS that supports this

battery pack and the maximum number of battery packs that can be connected to a

UPS.

1. Prepare the UPS to connect the battery pack(s). Note the holes used to attach the

battery pack connector clamp (near the center of the connector opening). Use a Phillips

head screwdriver to remove the battery pack connector clamp from the back of the UPS.

2. Turn the clamp over and loosely attach one end at the edge of the connector opening in

the UPS.

3. Holding the clamp aside, insert the battery pack connector into the UPS.

4. Secure the connector clamp.

MADE IN USA (WEST KINGSTON, RI)

SU 1400RMXL3U

XX01234 56789

Two battery packs correctly connected to a Smart-UPS XL.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 22 23

No comments

APC SU24R2XLBP Datasheet Page 14