Apc SMARTSLOT DP300E User Manual download pdf (Page 19)

Configuring via the Monitoring Port

continued

Main menu

description

The Main menu consists of two sections:

• Silcon DP300E Triple Chassis—factory settings of

the Triple Chassis.

• Silcon UPS—settings of the connected UPS. You

must ensure that these settings match those of the

attached UPS.

Changing the

Silcon UPS

settings

To change the Silcon UPS settings to match the settings of

the UPS, type the letter associated with the setting that you

want to change and follow the instructions that appear on

the screen.

After

configuration

After you have configured the Silcon Triple Chassis, per-

form the following steps in the order given.

1 Return to the Main menu and press

ESC

to quit the

session.

2 Disconnect the DTE device from the Silcon Triple

Chassis.

3 Remove power from the the Silcon Triple Chassis

by following the step that applies to the model you

are using.

a AP9604S: Disconnect the power connector of

the Silcon UPS cable from the 24 VDC power

supply of the UPS.

b AP9604SR: Unplug the universal power adapter

from the power outlet.

4 Continue with “Installing Accessories” on page

14.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 39 40

No comments

Apc SMARTSLOT DP300E User Manual Page 19