APC 990-2485 User Manual download pdf (Page 8)

8 SURT192RMXLBP2/SURT192XLBP2 6U User Manual

Operation

Battery LED

The battery LED is located on the front bezel of the XLBP. During normal operation the LED is not

illuminated.

On start-up the XLBP LED may illuminate and blink within the first minute. The LED should then extinquish.

LED Activity Possible Cause

XLBP LED illuminates briefly

~ On start-up the XLBP LED may illuminate

and blink within the first minute.

~ The

XLBP is establishing communication

with other components of the system.

~ The XLBP is conducting a normal periodic

self test

Normal operation

XLBP LED remains illuminated after start-up or illuminates during operation

XLBP LED is blinking slowly

(one blink per second).

One or more battery modules are not connected

XLBP LED is blinking rapidly

(three blinks per second).

A communication fault exists, check cable connections

The XLBP LED remains illuminated. ~ A potential hardware fault exists contact APC, refer to the Service

section in this manual

Battery module and pair identification

The PowerView will reference XLBP configuration in the

following manner.

External Battery Pack

BattPair_1 BattPair_2

Module_1 Module_2 Module_3 Module_4

BattPair_3 BattPair_4

Module_5 Module_6 Module_7 Module_8

1 2 3 4 5 6 7 8 9 10

No comments

APC 990-2485 User Manual Page 8