APC Back-UPS 500 User Manual download pdf (Page 3)

User Manual Back-UPS BC500-RS, BC650-RS

Turn On the Back-UPS

Press the Power ON button located on the front panel of the Back-UPS. The

Power On/Replace Battery LED will illuminate and a single short beep will be

audible to indicate that the Back-UPS is providing protection for connected

equipment.

The Back-UPS battery charges fully during the first 10 hours while connected

to utility power. The Back-UPS battery will charge while the Back-UPS is

turned on or off and is connected to utility power. Do not expect full battery

runtime capability during the initial charge period.

Specifications

Input Voltage 230 VAC nominal

Frequency 50/60 Hz

Brownout Transfer 180 VAC (typical),

160 VAC (maximum adjustable)

Over-voltage Transfer 266 VAC (typical),

278 VAC (maximum adjustable)

Output UPS Capacity (total) BC500-RS: 500 VA/300 W

BC650-RS: 650 VA/390 W

Voltage On Battery 230 Vac rms

(step-approximated sine wave)

Frequency - On Battery 50 Hz ±1 Hz, 60 Hz ±1 Hz

Transfer Time 6 ms typical, 10 ms maximum

Protection

and Filtering

AC Surge Protection Full time, 273 joules

AC Input Resettable circuit breaker

Battery Type (maintenance-free) 12 V, 7.2 Ah

Average Life 2 - 5 years depending on the number of

discharge cycles and environmental

temperature

Typical Recharge Time 8 Hours

1 2 3 4 5 6 7 8 ... 13 14

No comments

APC Back-UPS 500 User Manual Page 3