APC Smart-UPS C 1000VA 2U LCD 120V Specifications download pdf (Page 8)

Smart-UPS C 1000/1500 VA 120 V Rack-Mount 2U6

LED status indicators

LCD status indicators

System Faults

Status LED

Audible

Indicator On Audible Indicator Terminates

Power On

The UPS is supplying utility power to

connected equipment.

The Online/On Battery LED

illuminates green.

None N/A

On Battery

The UPS is supplying battery power

from the internal battery pack.

The Online/On Battery LED

illuminates amber.

The UPS beeps

4 times every 30

seconds.

The beeping stops when utility

power is restored or the M

UTE

button is pressed for 2 seconds.

System Fault

The UPS detects an internal system

fault.

System Fault LED illuminates

red.

Constant tone

The alarm stops when the P

OWER

O

N/OFF button is pressed for 2

seconds to trigger a Fault Reset.

Site Wiring Fault

The building wiring presents a shock

hazard that must be corrected by a

qualified electrical.

Site Wiring Fault

LED flashes red.

None N/A

Status LCD Icon Audible Alarms Audible Alarm Terminates

On Battery

The UPS is supplying battery power to the

connected equipment.

Beeps 4 times

every 30 seconds.

The beeping stops when utility

power is restored or the UPS is

turned off.

Utility Power Overload

An overload condition has occurred while the

UPS is operating on utility power.

Constant tone

The alarm stops when nonessential

equipment is disconnected from the

outlets or the UPS is turned off

Battery Power Overload

An overload condition has occurred while the

UPS is operating on battery power.

Constant tone

The alarm stops when nonessential

equipment is disconnected from the

outlets or the UPS is turned off.

Low Battery

The UPS is supplying battery power to the

connected equipment and the battery is near a

total discharge state.

Continuous

beeping

The beeping stops when utility

power is restored or the UPS is

turned off.

Battery Fault

The UPS is operating on utility power, but the

battery is not functioning properly. The battery

has reached the end of its useful life.

N/A

Replace the battery.

System Fault

The UPS has experienced an internal fault.

N/A

Identify the fault message on the

display and refer to System Faults.

F01

Output Short Circuit

F02

Output OverLoad

F03

AVR Relay Weld

F04

Output Over Voltage

F05

Unit Over Temperature

F06

Inverter

bu088b

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Comments to this Manuals

No comments