APC RAID Subsystem SCSI-SATA II User Manual download pdf (Page 30)

SCSI to SATA II RAID Subsystem

User Manual

2. Place one inner bracket to the side of the chassis. Align the holes on the front

side of the inner rail to the holes on the RAID system ear. Tighten the screw

that was removed in Step1.

3. Use four M4 flat head screws to attach the inner bracket to one of the side.

Make sure the holes of the inner bracket are aligned to the holes on the side of

the RAID system.

4. Repeat Steps 1 to 3 for the other inner bracket on the left side.

5. Loosen eight M4 screws on each of the rack rails. Make the necessary

adjustment on the length of the rack rails to conform to the depth of the rack.

Then screw the M4 screws back to the rack rails.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 89 90

No comments

APC RAID Subsystem SCSI-SATA II User Manual Page 30