APC PDPB150G6F User's Guide download pdf (Page 10)

User Guide InfraStruxure 150kVA Power Distribution Unit 2

Network management features

These applications and utilities work with a PDU that connects to the network through its Network

Management Card (NMC):

• StruxureWare—Provide enterprise-level power management and management of APC agents,

PDUs, information controllers, and environmental monitors

• APC PowerNet

Management Information Base (MIB) with a standard MIB browser—Perform

SNMP SETs and GETs and to use SNMP traps

• Device IP Configuration Wizard—Configure the basic settings of one or more Network

Management Cards over the network

• Security Wizard—Create the components needed for high security for the PDU when you are

using Secure Sockets Layer (SSL) and related protocols and encryption routines

Internal Management Features

Overview

Use the Web interface or the command line interface to manage the Network Management Card (NMC)

of the PDU. For more information about the internal user interfaces, see “Web Interface” on page 60 and

“Command Console” on page 5.

Access priority for logging on

Only one user at a time can log on to the NMC. The priority for access, beginning with the highest

priority, is as follows:

• Local access to the command console from a computer with a direct serial connection to the

NMC.

• Telnet or Secure SHell (SSH) access to the command line interface from a remote computer.

• Web access, either directly or through StruxureWare

Types of user accounts

The NMC has three levels of access (Administrator, Device User, and Read-Only User), which are

protected by user name and password requirements. During authentication, the user's credentials are

compared against the Local User Database and/or are validated against a RADIUS server (depending on

configuration). If valid, access with appropriate permissions is granted to the command line interface.

• An Administrator can use all the menus in the Web interface and command line interface. The

default user name and password are both apc.

• The default user name for the Device User is device, and the default password is apc. A Device

User can access only the following:

– In the Web interface, the menus on the Home, Power Distribution, Contacts/Relays,

Alarms, and Logs tabs and the event and data logs.

– In the command line interface, the equivalent features and options.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 115 116

No comments

APC PDPB150G6F User's Guide Page 10