Apc ADSL 4-Port User Manual download pdf (Page 28)

ADSL 4-Port Ethernet USB Wireless-G Router User Guide

ADSL 4-Port Ethernet USB Wireless-G Router User Guide Page 28 of 52

Figure 1-22 :Quickstart (PPPOE Connection Setup)

5.6.5

LAN Configuration

You can change the ADSL Router’s IP address by, clicking Setup and under LAN Setup, select

LAN Configuration, then click Configure.

Your ADSL Router’s default IP address and subnet mask are 192.168.1.1/255.255.255.0; this

subnet mask will allow the ADSL Router to support 254 users. If you want to support a larger

number of users you can change the subnet mask; but remember. The DHCP server is defaulted

to only give out 255 IP addresses. Further remember that if you change your gateways’ IP

address and you have DHCP enabled, the DHCP configuration must reside within the same

subnet The default gateway is the routing device used to forward all traffic that is not addressed

to a station within the local subnet. Your ISP will provide you with the default gateway Address.

The hostname can be any alphanumeric word that does not contain spaces. The domain name is

used to in conjunction with the host name to uniquely identify the gateway. To access the ADSL

Router’s web pages the user can type 192.168.1.1 (the default IP address) or type

mygateway.ar7. The apply button will temporarily save this connection. To make the change

permanent you need to click on Save Settings (at the side of the page). At the system commands

page, click on Save Settings.

Refer to Figure 1-23

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 51 52

No comments

Apc ADSL 4-Port User Manual Page 28