APC AP5202 User's Guide download pdf (Page 16)

®®

USER’S GUIDE

kvm switch

To recover from a lost password:

1. Turn off the power to the KVM Switch.

2. Open the cover of KVM Switch, and short the jumper marked "Restore

Default Password".

3. Turn the power of KVM Switch while this jumper is shorted. Wait until

the LEDs stop blinking and then turn off the power.

4. Resume the jumper to the open position, and put the cover on.

5. Turn the power back on for the KVM Switch. The assigned user names

and passwords will all be cleared. Start the OSD with the default user

name and password.

SKP (F5). To activate the SKP function, press F5 or click the F5 menu

option at the top of the main menu screen.

SKP enables you to switch the console focus from the current active

computer port to the next or preceding computer port. The SET function

(see SET (F3)) determines which computers are available for Skip Mode

switch selection.

• When you select a port for Scan/Skip Mode, a triangle symbol appears

to the left of the Port ID.

• The console does not function normally while in Skip mode. You must

exit Skip mode to regain console control.

• To exit Skip mode, press the

SPACEBAR or ESC.

For navigation functions, see the Hot Key summary table.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 39 40

No comments

APC AP5202 User's Guide Page 16