APC AP9608 Specifications download pdf (Page 8)

Customise your power

protection solution with

UPS Accessories* from APC

Reboot hung servers

via Web, SNMP, or Telnet

From your Network Management Station you

may use the 10Base-T Ethernet Web/SNMP

Management Card (AP9606) and/or Token

Ring (AP9603) SNMP Card. Perform remote

UPS shutdown, reboot, and other management

and diagnostic functions.

Integrate smoke or halon alarms,

telephone switches and other dry

contact closures

Add security to your UPS system with the

Relay I/O Card (AP9610).

Monitor temperature, humidity and

rack security

Smoke alarms and halon alarms can also be

monitored with the Environmental

Monitoring Card (AP9612TH) through the

PowerChute plus, PowerNet SNMP or the

Out-of-band Management Card interface.

The alarm switch kit (AP9513) is designed to

monitor and notify users (when used in con-

junction with AP9612TH and the NetShelter

rack enclosure) if the NetShelter door has

been breached.

Extended UPS monitoring

The Isolated Serial Extension Cable (ISEC) is

designed to provide bulletproof monitoring of

an APC UPS for extended distances up to100

meters (AP9825).

Reboot hung servers and networking

equipment remotely via modem

The Out-of-band Management Card (AP9608)

provides complete UPS information, paging on

power problems and remote safe reboot of

servers via user supplied modem.

Safely shutdown up to three servers

The 2-Port Interface Expander Card (AP9607)

provides two additional ports to facilitate

graceful system shutdown via dependable

hardwire connections and allows advanced

UPS management. The unit is ideal for “server

farms” or multiple operating system

environments, since all three servers can be

running different OSs.

Shutdown multiple servers from one UPS

Connect up to 8 completely OS-independent

servers to a single UPS with Share-UPS

™

(AP9207) 8-Port interface expander (15 servers

with 2 Share-UPS). Share-UPS integrates with

PowerChute plus software. Each server runs its

own copy of PowerChute plus software, for

monitoring and power management of the UPS.

Integrate multiple accessories

The Triple Expansion Chassis (AP9604) is an

external, 1U, 19” rack-mountable device that

allows integration of additional UPS slot

accessories with a Smart-UPS, Matrix, or

Symmetra Power Array. Triple Expansion

Chassis can be used in a rack environment

or as a stand-alone device that allows you to

add up to three (3) slot cards to UPSs that

have an existing slot already in use.

MasterSwitch

™

remote reboot device

The MasterSwitch (AP9210i) network power

controller can easily reboot remote servers,

internetworking equipment, or banks of

modems to prevent on-site service calls. The

perfect complement to your High Availability

solution, MasterSwitch gives you power

distribution and complete, remote control of

eight independent power channels to put an

end to the frustration of locked-up servers

and wasted management time.

Remote Power-off Device

The APC Remote Power-off Device (RPO)

allows data center managers to turn off APC

UPS output with a remote switch. When used

in conjunction with an Emergency Power-Off

(EPO) system, the RPO can turn off equipment

in an emergency. (AP9830)

Isolated Serial

Extension Cable

APC MasterSwitch

Power Controller

Triple

Expansion Chassis

Web/SNMP

Management Card

(*Note: APC accessory cards are designed to

work with APC UPS products that have a

SmartSlot bay. The SU420INET and SU620INET

products do not have a SmartSlot bay.)

Management Peripherals for Smart-UPS

Out-of-band

Management

Card (AP9608)

Relay I/O Card

(AP9610)

2-port

Interface

Expander

Card (AP9607)

Environmental

Monitoring Card

(AP9612TH)

Share-UPS8 port

interface expander

APC Remote

Power-off Device

For more Turkish information, visit the web site at

www.APCturkey.com

1 2 3 4 5 6 7 8 9

Comments to this Manuals

No comments

APC AP9608 Specifications Page 8

Comments to this Manuals

Related products and manuals for Networking APC AP9608