APC AP9630 User's Guide download pdf (Page 15)

13UPS Network Management Card 2 User’s Guide

Example 1: To enable the override of manual setting, type:

ntp -OM enable

Example 2: To specify the primary NTP server, type:

ntp -p 150.250.6.10

ping

Access: Super User, Administrator, Device User

Description. Determine whether the device with the IP address or DNS name you specify is connected to

the network.

Four inquiries are sent to the address.

Example: To determine whether a device with an IP address of 150.250.6.10 is connected to the network,

type:

ping 150.250.6.10

portspeed

Access: Super User, Administrator

Description:

Example:

To configure the TCP/IP port to communicate using 100 Mbps with half-duplex communication

(communication in only one direction at a time), type:

portspeed -s 100H

prompt

Access: Super User, Administrator, Device User

Option Argument Definition

-OM enable | disable

Override the manual settings.

-p <primary NTP server> Specify the primary server.

-s <secondary NTP server> Specify the secondary server.

Argument Description

Type an IP address with the format xxx.xxx.xxx.xxx, or the DNS name configured

by the DNS server.

Option Arguments Description

-s

auto | 10H | 10F |

100H | 100F

Define the communication speed of the Ethernet port. The auto command

enables the Ethernet devices to negotiate to transmit at the highest possible

speed.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 23 24

No comments

APC AP9630 User's Guide Page 15