APC PD300G6FK1 Specifications download pdf (Page 68)

Section 6: SPDU Guide Specifications

64 SPDU Technical Handbook

D. Full-frame Floor Stand

1. A full-frame floor stand must be available for enclosure leveling, and as a means of

providing bottom cable access independent of a raised floor application.

2. The floor stand must be constructed of welded steel, and be offered in heights of up to 32

inches with an adjustable range of +/- 3 inches.

E. Input Surge Arrestor

1. A multi-stage suppression circuit device must be available as a means of arresting input

surge. This device would utilize fast-acting 40 mm Metal Oxide Varistors (MOVs) and be

connected in a high-energy, parallel design for Category A, B, and C3 applications. Each

mode of protection would be individually fused, and contain a thermal cutout to ensure

safe operation during severe over-voltages and high fault-current conditions. The device

must have an interrupting rating of 100,000 RMS symmetrical amperes, and be capable of

withstanding 5,000 Category C3 impulses with less than 10% drift.

2. The suppression circuit device must also have an AC tracking filter to provide wave

shapes smoothing. It must further provide a high level of EMI/RFI noise attenuation, as

well as electrical noise attenuation of up to -50 db from 100 kHz to 100 MHz. The device

must be installed with a minimum conductor length in order to achieve maximum

performance.

3. For Basic and Advanced-level monitoring systems, this device should offer a remote

monitor that is mounted on the front panel of the SPDU as an added option. For the

Premium-level monitoring system, this device should offer an alarm contact that connects

with the monitor to annunciate suppression device failures as an added option.

PART 3 — EXECUTION

3.1 SERVICE

A. Factory start-up and user training, preventive maintenance service, and full service for the

above-specified system must be included upon request. The manufacturer must also employ an

international service organization that consists of factory-trained field service personnel who

are dedicated to the start-up, maintenance, and repair of all provided power equipment.

B. The manufacturer must further maintain a full-time (24 hours per day, 365 days per year) call

center to provide readily available technical support to end users and to facilitate emergency

service dispatching.

End of Section 16460

1 2 ... 63 64 65 66 67 68 69 70 71 72

No comments

APC PD300G6FK1 Specifications Page 68