Post-Installation Procedures for the UPS
4 Symmetra
®
LX Start Up Guide
To Connect Battery Modules in B
1
Orientation:
1. Verify that the battery module is in the Disconnect
,
or Open position.
2. Ensure that all power is turned OFF. See “Turn Off All Power” on page 2.
3. To connect the battery module:
a. Insert a coin
-
in the battery module dial.
b. Turn the dial
.
counterclockwise until it is in the Connect
/
or Closed position.
To Connect Battery Modules in B
2
Orientation:
1. Verify that the battery module is in the Disconnect
,
or Open position.
2. Ensure that all power is turned OFF. See “Turn Off All Power” on page 2.
3. To connect the battery module:
a. Insert a coin
-
in the battery module dial.
b. Turn the dial
.
counterclockwise until it is in the Connect
/
or Closed position.
Go to Next Procedure
1 . If your configuration includes Extended Run Cabinets, go to the “Post-Installation Procedures for
the Extended Run Cabinet (Optional)” on page 5.
2 . If your configuration doesn’t include Extended Run Cabinets, go to the “Post-Installation System
Checklist Procedures,” beginning on page 8.
Pb
Pb
,
.
-
.
,
-
Comments to this Manuals