APC SmartSlot AP9604SR User's Guide download pdf (Page 16)

Quick Configuration

Control console

After you log on at the control console, as described in either

“Local access to the control console” on page 14 or “Remote

access to the control console” on page 15:

1. Choose Network from the Control Console menu.

2. Choose

TCP/IP

from the Network menu.

3. If necessary, change the

Boot Mode

setting to Manual.

4. Set the System

, Subnet Mask and Default Gateway

address values.

5. Press

TRL

-C

to exit to the Control Console menu.

6. Log out (option 4 in the Control Console menu) to have

the changes take effect.

Note

If you disconnected a cable during the

procedure described in “Local access to the

control console” on page 14, reconnect that

cable and restart the associated service.

1 2 ... 11 12 13 14 15 16 17 18 19

No comments

APC SmartSlot AP9604SR User's Guide Page 16