APC NBWL0356 User's Guide download pdf (Page 93)

85NetBotz Appliance User’s Guide

6. For each pod that you want to centrally manage, select the pod from the Available Pods list

(ignore any instances of Base Enclosure in the list) and then click Share Remote Pod.

Setting up a Pelco Sarix shared IP camera pod

When installing a Pelco Sarix camera for use with a NetBotz appliance, perform the following steps

before following the normal IP camera pod setup procedure.

1. Connect the Sarix camera to your network.

2. Discover the camera's IP using the Pelco Device Utility.

3. In a Web browser, bring up the start page of the camera's Web UI (http://<ip_address>).

4. Click on the Login tab and log in with the default password.

5. Click Settings to display the settings page.

6. On the System tab, click Restore all Factory Defaults in the bottom right corner.

7. Wait for the camera to restart.

Setting up shared IP camera pods

To designate shared IP camera pods:

1. From the Appliance Settings area of the Configuration view, double-click the Rack Access

PX-HID Pod Sharing icon. The Rack Access PX-HID & Pod Sharing Configuration window

opens.

2. Click Add Remote Camera. The Configure Remote Device dialog box opens.

3. From the Remote List, select the camera you would like to share. The Hostname/IP address field

updates automatically.

– If the IP camera is not listed (only IP cameras on the same subnet will appear in the list), go to

“To designate shared sensor pods:” on page 84, where you can add the camera by entering the

IP address of the camera.

– Do not select any instances of Base Enclosure in the list. Those are for a future enhancement.

4. Enter information in the fields described below as needed. Then click OK. The camera appears in

the Remote Devices list.

5. Click the camera from the Remote Devices list. The list in the Available Pods area updates.

Field Description

Port TCP port over which pod sharing communications occur. Default

is 80 for HTTP, and 443 for HTTPS.

SSL Options The SSL options for pod sharing communications.

User name The User name used to access the remote device. Some pod

sharing functionality is only available to a user account with

Administrator privileges.

Password / Verify

password

Type the password to be used to access the remote device.

Timeout (seconds) The number of seconds that the appliance waits for a response from

the remote device before it considers the remote device

unresponsive.

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 134 135

No comments

APC NBWL0356 User's Guide Page 93