User ManualC Type Wall Mount Power FilterC2C
- 2 -world. Over the last 20 years, APC has been a pioneer in the development of new power protection technologies that have resulted in countless ind
- 3 -Unit Power CapacityThe C2C is rated for 12 Amps. The C2C is capable of supplying the dynamic peak current draws required by any component designe
- 4 -Side Panel Indicators The following section describes the LED indicators on the C2C’s side panel. The side panel controls and indicators for the
- 5 -Overload Status IndicatorIf illuminated, this LED indicates the C2C is overloaded. Unplug components until the light is extinguished. Detachable
- 6 -Outlet Panel This section describes outlet panel functionality. The outlet panel for the C2C Power Filter is shown in Figure 3. Outlet panel desc
- 7 -Installation C2C installation consists of the following steps: 1. Apply power 2. Making connections Apply Power Prior to connecting equipment to
- 8 -Technical Specifications The following table contains the specifications for the C2C Power Filters. Item SpecificationINPUTInput Voltage Range fo
- 9 -Troubleshooting This section describes possible causes and solutions for the following problems:• Unit will not turn on. • WIRING OK indicator LE
- 10 -WIRING OK indicator LED is not illuminated APC Technical Support If a problem cannot be resolved contact APC Technical Support. Telephone 1-888
© 2009 APC by Schneider Electric. APC, the APC logo, and TRADEMARK NAMES are owned by Schneider Electric Industries S.A.S., American Power Conversion
0-3047A990-3047A1/2010
iSafety Information1.Read this manual - Read all of the safety and operating instructions beforeinstalling and operating this device.2.Keep this manua
iiSafety Information (Continued)14.Overloading - Do not overload the wall outlet where this device is beingconnected. Do not overload this device. Ens
iiiRegistration Verification ConfirmationBy registering your purchase now, it guarantees you will receive all the information and special offers you q
ivClass B Labeling and Instruction Manual RequirementsDevices subject to Certification must be labeled with an FCC Identifier. Devices subject to Veri
vTable of ContentsSafety Information i Protect Your Investment iiiClass B Labeling and Instruction Manual Requirements ivIntroduction 1Proven Expert
vi
- 1 -Introduction Congratulations on purchasing APC’s C2C Wall Mount Power Filter, shown in Figure 1. The C2C is designed for the unique mounting req
Comments to this Manuals