APC ACF002 Datasheet download pdf (Page 14)

10 NetworkAir RM Air Distribution Unit

Installation

Cutting the

opening in the

raised-floor

tile(s) (raised

floor

applications

only)

1. Using the inside edge of the duct opening as a template,

mark the location for the opening to be created in the

raised floor tile.

2. Move the enclosure to provide access to the floor tile(s)

for cutting.

3. Remove the floor tile(s) and cut an opening in the tile(s)

at the location marked. Use tools that will provide a

clean, accurate cut.

4. Using the supplied alcohol swab, clean the edges of the

opening in the floor tile.

5. Remove the hook halves of the hook-and-loop tape from

the bottom lip of the fabric portion of the duct. Remove

the protective plastic covering the adhesive. Place the

tape along the perimeter of the opening, adhesive-side

down.

6. Reinstall the floor tile in its original position.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 27 28

No comments

APC ACF002 Datasheet Page 14