APC AP95500 Datasheet download pdf (Page 163)

Information

Typically used to set up an alarm action to

respond to events considered to be unimportant,

but important enough to require alert notifications

when they occur.

Warning

Typically used by SNMP devices to indicate a

condition exists that may require attention to

make sure it does not deteriorate into a critical

state. For example, a UPS that is running on

battery power during a power failure will shut

down its load equipment if its battery power is

depleted before power returns to normal.

Error

Typically used to indicate a sensor threshold

violation requires immediate attention. For

example, a high temperature violation that could

lead to equipment damage.

Critical

Typically used by SNMP devices to indicate an

operational failure requires immediate attention.

For example, a battery that needs to be replaced

can result in the loss of data at the UPS load

equipment if a power failure occurs.

Failure

Typically used to indicate an operational failure

requires immediate attention. For example,

communication with a camera pod was lost which

could lead to an undetected security violation.

"Alarm Action Schedule" display

Use this display to define the specific periods of time, for each day of the week, during which

an associated activity will be disabled (by default, scheduling is enabled 24 hours a day,

seven days a week).

Note: This display is used to schedule when an alarm action will be enabled and disabled,

using the action's settings display.

The table provides cells for 15-minute increments, and columns for every day of the week.

You can do all of the following to schedule when an alarm action is enabled:

• Click a column title to enable or disable all of that day's cells.

• Drag your mouse from one cell to another cell in a column, to enable or disable a set

of cells.

• Drag your mouse from a cell in one column to a cell in another column, to enable or

disable an identical set of cells for each of the selected days.

• Click a single cell.

"Send E-mail" display

Use this display to define the settings for a Send E-mail alarm action on the StruxureWare

Central server.

A name field, severity selections, and the "Alarm Action Scheduling" display that all alarm

action types share, are also available.

Note: Make sure the StruxureWare Central server's SMTP settings are all defined properly.

StruxureWare Central 6.3.0

163

1 2 ... 158 159 160 161 162 163 164 165 166 167 168 ... 299 300

Comments to this Manuals

No comments

APC AP95500 Datasheet Page 163

Comments to this Manuals

Related products and manuals for Network management software APC AP95500