Element Description
severity level indicates, see Alarm action
severity settings.
Add
Click to access the "Add Trap Receiver"
wizard.
Remove
Click to delete a selected trap receiver from
the list.
Edit
Click to access the "Edit Trap Receiver"
wizard for a selected trap receiver.
Send Test Trap
Click to send a test trap or inform to a
selected trap receiver.
Note: The StruxureWare Central server
cannot determine if a trap or inform was
received. You must verify its receipt at the
trap receiver. For information about what
can cause a trap test to fail, see Test trap
failures.
"Add (or Edit) Trap Receiver" display
Use this display to select the Trap Type you want to send to a new ( Add) or existing
( Edit) trap receiver: SNMPv1 Trap or SNMPv3 Inform.
"SNMPv1 Trap Settings" display
Use this display to define the SNMPv1 settings for a new trap receiver, or to edit the SNMPv1
settings for an existing trap receiver.
Element Description
IP Address
Identify the IP address of the Network
Management System console.
Port
Select the port number the Network
Management System console uses to receive
SNMPv1 traps.
Read Community Name
Identify the read community string that will be
used when sending SNMPv1 traps to the
Network Management System console.
Severities
Select (check-mark) at least one severity for
which you want the StruxureWare Central server
to send SNMPv1 traps to the Network
Management System console when that severity
level is reported by a monitored SNMP device,
NetBotz Appliance, or devices associated with
those appliances.
Note: For information about what each severity
level indicates, see Alarm action severity
settings.
StruxureWare Central 6.3.0
204
Comments to this Manuals