APC Network Management Card AP9617 Specifications download pdf (Page 20)

16 Installation and Quick Start

Quick Configuration

2. Use Ping with a size of 113 bytes to assign the IP address

defined by the ARP command. For the IP address

defined in step 1, use one of the following commands:

– Windows command format:

ping 156.205.14.141 -l 113

– LINUX command format:

ping 156.205.14.141 -s 113

3. Use Telnet to access the Management Card at its newly

assigned IP address. For example:

telnet 156.205.14.141

4. Use apc for both user name and password.

5. See “Control console” on page 16 to finish the

configuration.

Control console

After you log on at the control console, as described in “Local

access to the control console” on page 15 or “Remote access to

the control console” on page 15:

1. Choose Network from the Control Console menu.

2. Choose TCP/IP

from the Network menu.

3. If you are not using a BOOTP or DHCP server to

configure the TCP/IP settings, select the Boot Mode

menu and then select Manual.

4. Set the System

IP, Subnet Mask, and Default Gateway

address values. (Changes take effect when you log off.)

5. Press

ENTER to return to the TCP/IP menu.

6. Press

CTRL+C to exit to the Control Console menu.

7. Log out (option 4 in the Control Console menu).

Note

If you disconnected a cable during the

procedure described in “Local access to the

control console” on page 15, reconnect that

cable and restart the associated service.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 31 32

No comments

APC Network Management Card AP9617 Specifications Page 20