APC Network Management Card AP9617 Specifications download pdf (Page 24)

20 Installation and Quick Start

How to Access a Configured Network Management Card

Simple Network

Management

Protocol (SNMP)

After you add the PowerNet MIB to a standard SNMP MIB

browser, you can use that browser to access the Network

Management Card. The default read community name is

public; the default read/write community name is private.

To use InfraStruXure Manager to manage a UPS on the public

network of an InfraStruXure system, you must have SNMP

enabled in the Management Card interface.

To enable or disable SNMP access, you must be an

Administrator. Select the Administration tab, select the

Network menu on the top menu bar, and use the access option

under SNMP on the left navigation menu.

FTP and SCP

You can use FTP (enabled by default) or SCP to transfer

downloaded firmware to a Management Card, or to access a

copy of a Management Card’s event or data logs.

To use InfraStruXure Manager to manage a UPS, you must

have FTP Server enabled in the Management Card interface.

To enable or disable FTP Server access, you must be an

Administrator. Select the Administration tab, select the

Network menu on the top menu bar, and use the FTP Server

option on the left navigation menu.

Analog modem

(AP9618)

The AP9618 Network Management Card EM/MDM has an

internal analog modem you can use for dial-in access to its

Management Card’s control console.

Managing the

security of your

system

No comments

APC Network Management Card AP9617 Specifications Page 24