APC Network Management Card AP9618 User's Guide download pdf (Page 11)

Installation and Quick Start 7

Installation in a UPS

Step 2: Install

the Network

Management

Card

If you are installing the Management Card in a Symmetra UPS

that uses more than one

APC management product, see

Installation of Multiple Management Cards, a copy of which

came with the Management Card. You must install the APC

management products in the correct order for them to operate

properly.

1. Use the same screws that hold the slot cover in place to

secure the Management Card in the

UPS card slot.

2. Connect a network interface cable to the 10/100Base-T

network connector on the Management Card.

3. Reconnect the

UPS to its input power source.

4. Turn on the

UPS.

5. See “Quick Configuration” on page 10.

Caution

The Network Management Card is sensitive to

static electricity. When handling the

Management Card, touch only the end plate

while using one or more of these electrostatic-

discharge devices (ESDs): wrist straps, heel

straps, toe straps, or conductive shoes.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 25 26

No comments

APC Network Management Card AP9618 User's Guide Page 11