APC Snap Server 2200 User Manual download pdf (Page 24)

Using Quick Configure

18 Snap Server Administrator Guide

Using Quick Configure

1 Start your browser and enter the

server’s name or IP address in the

Location or Address box. Press

Enter to display the Snap Server

Home page.

2 On the Home page, click

Administration.

3 When asked to log in, enter

Administrator as the user name and

enter the Administrator password

(leave the password blank if you

have not changed it from its

default).

4 On the Administration menu,

click

Quick Configure for the initial setup procedure.

5 Follow the Quick Configure’s instructions to customize the server. For more

information about the settings on any page, click the

Help link on that page.

6 When you complete the initial setup, click Finish to apply your changes, and if

necessary, restart the server.

7 At this point, you may want to register your Snap Server online. The link listed

on this page will allow you to do so. A new browser window will open to the

Snap Server registration page.

After you complete the Quick Configure process, you might want to return to the

Administration menu to change the disk configuration or set up security. The

remainder of this chapter describes this process.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 53 54

No comments

APC Snap Server 2200 User Manual Page 24