5NetShelter Four-Post Rack—Installation
Install the Four-Post Rack
Assemble the rack
Note: Fasten the M8 x 16-mm hex-head screws loosely during assembly of the Four-Post
Rack. When the rack is upright, complete the assembly by fully tightening all the screws.
1. Insert the fastening tabs on the left and right vertical frame posts into the holes of the side
frame brackets . Secure the side frame brackets by sliding them inward. Ensure that the U-
spacing label is facing upright on both the left and right vertical frame posts.
2. Attach the four horizontal frame brackets to the assembled half of the rack using eight M8 x
16-mm hex-head screws .
3. Repeat step 1 with the remaining left and right vertical frame posts and side frame brackets .
Ensure that the U-spacing label is facing the same direction on both the left and right vertical
frame posts.
ns1370a
ns1371a
ns1370a
Comments to this Manuals