NetShelter VX Enclosure: Unpacking, Installation, Customization 13
How to Reverse the Front Door
Remove the side panels:
1. Remove both side panels.
Reverse the door handle:
2. Remove the two Phillips screws from the rear of the door handle assembly and remove the
handle assembly from the door.
3. Rotate the door handle assembly 180° and reinstall it, using the hardware removed in step 2.
Remove the door:
4. Open the door and pull down on the spring-loaded hinge pin attached to the top of the door. Lift
the door from its frame and safely set it aside.
See “How to Remove and Install the Side Panels” on page 10.
Warning
To avoid personal injury or damage to the enclosure, one person should
support the door while another removes the door from its frame.
Comments to this Manuals