6
NetBotz Rack Access Pod 170 Installation Guide
2. Install the
brackets on
each end of the
Rack Access
Pod.
3. Remove the
existing
brackets from
the Sensor Pod
150.
4. Remove the
toolless peg-
mount from the
left-hand side
of the Sensor
Pod 150.
5. Mount the
Rack Access
Pod to the
Sensor Pod
using the
toolless peg-
mount.
6. Secure the
coupled Rack
Access Pod and
Sensor Pod to
the rack, using
the remaining
Rack Access
Pod bracket,
cage nuts and
screws
(provided with
the rack).
Comments to this Manuals