Apc NETBOTZ NBRK0200 User Manual download pdf (Page 10)

NetBotz Rack Monitor 200 Installation and Quick Configuration Manual6

How to Install the Rack Monitor 200

Note: Install the Rack Monitor 200 in an environment compatible with the environmental

specifications on page 23.

Note: When you install the Rack Monitor 200 in the rack, do not create a hazardous

condition due to uneven mechanical loading. For example, do not use the Rack Monitor 200

as a shelf.

You can install the Rack Monitor 200 in the front or the rear of the rack using the rack-mount option,

which requires 1 U of rack space. If using an APC NetShelter

VX or SX rack, you also have the option

to use the toolless peg-mounts, which do not use any U-spaces.

Toolless peg-mount installation

Note: The toolless peg-mount installation is only available with a NetShelter VX or SX rack

or enclosure.

Caution: To avoid equipment damage, use only the hardware provided when installing the

power cord retainer bracket.

1. Install the power cord retainer bracket as shown.

2. In the left or right cable channel in the rear panel of the

enclosure, install the Rack Monitor 200 in a set of mounting

holes. Be sure to push down until it locks.

3. See “Power cord and network cable connections” on page 8.



8-32 x 1/4-in Phillips-head screws



Power cord retainer bracket

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 35 36

No comments

Apc NETBOTZ NBRK0200 User Manual Page 10