Apc NETBOTZ NBRK0200 User Manual download pdf (Page 15)

11NetBotz Rack Monitor 200 Installation and Quick Configuration Manual

How to Connect an Alarm Beacon and Other

Optional Devices

1. To install an alarm beacon:

– Mount the alarm beacon in a visible position

either on the roof of the rack or inside the rack.

– Route the alarm beacon cable to the Rack Monitor

200. The alarm beacon cable may be extended to a

maximum of 100 m (300 ft), using RJ-45

couplings and standard CAT-5 cables.

– Connect the cable to the Beacon port.

2. Connect one device to the Voltage Output.

Caution: The Relay Output is rated for Class 2 circuits only.

3. Connect one device to the Relay Output.

4. Connect a device to the Switched Outlet.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 35 36

No comments

Apc NETBOTZ NBRK0200 User Manual Page 15