APC SBP Installation Manual download pdf (Page 12)

6Smart-UPS

VT SBP with Power Distribution 10-30kVA, 208V, Installation Manual - 990-4198A

Shipping and Receiving

Shipping

The wall-mount version of the Smart-UPS VT SBP with Power Distribution is shipped in a

corrugated box, and protected during shipment by specially designed internal packaging. Front door

keys and all appropriate documentation are stored in a plastic sleeve inside the box.

Receiving

1. Upon receipt, inspect the box for obvious signs of rough handling/external damage.

2. Transport the box to the installation site using a dolly or a hand-truck. The box is relatively

heavy (weighing approx. 120lbs [54.5kg]), so DO NOT lift with less than three people.

3. At the installation site, open the box and remove the SBP enclosure.

4. Use the enclosed keys to open the front door, and then conduct an internal inspection of the unit.

5. Record any damages observed and call the carrier immediately to allow their personnel to

conduct an equipment inspection, if necessary.

– Do NOT contact APC first — notify the carrier instead. Otherwise, APC may be unable to

assist in recovering the realized amount of the claim.

– All damage claims should be as specific as possible.

– BE SURE to request a copy of the carrier’s inspection report.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 31 32

No comments

APC SBP Installation Manual Page 12