APC Smart-UPS Specifications download pdf (Page 14)

Smart-UPS X-Series Operation10

Controllable Outlet Groups

Overview

The rear panel of the UPS has multiple outlets, some are grouped into Controllable Outlet Groups, all of

the other outlets are the UPS outlets, which function as an outlet group. All of these groups can

independently turn off, turn on, shut down, and reboot connected equipment.

The Controllable Outlet Groups can be commanded to do the following:

• Turn off: Disconnect from power immediately and restart only with a manual command

• Turn on: Connect to power immediately

• Shutdown: Disconnect power in sequence, and automatically reapply power in sequence when

utility power becomes available

• Reboot: Shut down and restart

In addition, the Controllable Outlet Groups and the UPS outlets can be configured to do the following:

• Turn on or off in a specified sequence

• Automatically turn off or shut down when various conditions occur

Note: If the Controllable Outlet Groups are not configured, all of the outlets on the unit will

still provide battery back-up power.

Model-specific Controllable Outlet Groups

750VA, 120 V and 230 V.

1000 VA, 120 V and 230 V.

Using the Controllable Outlet Groups and UPS outlets

The UPS outlets function as a master switch. They turn on first when power is applied, shut

off last when there is a power outage and battery run-time has been exhausted.

The UPS outlets must be turned on for the Controllable Outlet Groups to turn on.

1. Connect critical equipment to the UPS outlets (The 1500 VA units do not have UPS outlets.



Controllable Outlet Group(s)



UPS outlets

su04

36a

u0438a

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 27 28

No comments

APC Smart-UPS Specifications Page 14