APC SRT5KRMXLI-6W User Manual download pdf (Page 5)

3Smart-UPS On-Line SRT5K/6K Tower/Rack-Mount 3U/4U

Battery safety

• Before installing or replacing the batteries, remove jewelry such as wristwatches and rings.

High short circuit current through conductive materials could cause severe burns.

• Do not dispose of batteries by burning them. The batteries may explode.

• Do not open or mutilate batteries. Released electrolyte is harmful to the skin and eyes, and may be toxic.

Hardwire safety

• Verify that all branch circuit (mains) and low voltage (control) circuits are deenergized, and locked out

before installing cables or making connections, whether in the junction box or to the UPS.

• Wiring by a qualified electrician is required.

• Check national and local codes before wiring.

• Strain relief is required for all hardwiring (not supplied).

• All openings that allow access to UPS hardwire terminals must be covered. Failure to do so may result in

personal injury or equipment damage.

• Select wire size and connectors according to national and local codes.

General information

• The UPS will recognize as many as 10 external battery packs connected to the UPS. However there is no

limit to the number of XLBPs that can be used with the UPS.

Note: For each XLBP added, increased recharge time will be required.

• The model and serial numbers are located on a small, rear panel label. For some models, an additional label

is located on the chassis under the front bezel.

• Always recycle used batteries.

• Recycle the package materials or save them for reuse.

1 2 3 4 5 6 7 8 9 10 ... 35 36

No comments

APC SRT5KRMXLI-6W User Manual Page 5