APC SU3000RMXLI3U User Manual download pdf (Page 8)

3. Locate the battery module handle at the top of the

battery face plate .

4. Be careful during this step—the battery module is

heavy.

Pull the battery module handle toward you to

slide the battery module out of the UPS.

DO NOT pull on the battery cables or the white

cord.

OUNTING THE UPS IN THE RACK

Due to its weight, two people are required to install the UPS in the rack.

1. Supporting the UPS on both sides, carefully align

the unit with the rails. Use the handles  on the

side of the UPS to support the unit.

2. Each side of the UPS has a cleat  that must

slide into the groove on the rails. Insert each cleat

into its groove and slide the UPS into position.

3. Use the four ornamental screws supplied with the

UPS to attach the mounting brackets to the rack

post. Insert the screws into the top and bottom

holes in the U-space.

EINSTALLING THE BATTERY MODULE

1. Supporting the battery module on the bottom,

align it with the opening and slide the battery

module into the compartment.

2. Replace the two screws to secure the battery

module face plate.







1 2 3 4 5 6 7 8 9 10 11 12 13 ... 24 25

No comments

APC SU3000RMXLI3U User Manual Page 8