APC BC300 Series User Manual download pdf (Page 5)

Receiving, Unpacking, Moving and Storing the UPS and Batteries

990-1401

Installation Guide APC BC300 Series 40kW 208/450/480V UPS 5

2.0 Receiving, Unpacking, Moving and Storing the UPS and

Batteries

2.1 Receiving, Unpacking and Moving to Site

1. While the UPS system is still on the truck, inspect the equipment and shipping container(s)

for any signs of damage. Do not install the system if damage is apparent. If damage has

occurred, notify APC as soon as possible.

2. Compare the shipment with the bill of lading. Report any missing items to the carrier and

to APC immediately.

3. Remove the screws on the bottom part of the packaging side plates.

4. Remove the packing materials from the unit.

5. Verify compliance between type label on reverse side of UPS front door and system ordered.

Check input and output voltage.

6. Unbolt the unit from the pallet.

7. Remove the unit from the pallet with a forklift.

8. Use a forklift or hand truck to transport the unit to the installation or storage site. Study

the footprint to decide how to move the UPS through doorways and into position.

2.2 Storing the UPS and Batteries

Store the APC BC300 Series UPS between -4 and 104° F (-20 and 40° C). However, APC

recommends that the unit and batteries be stored between 59 and 77° F (15 and 25° C). This

temperature range, or cooler, allows batteries a longer shelf life. Recharge stored batteries

every 90 to 120 days.

See the section “Requirements on Site” in this Installation Guide for further details.

CAUTION!

Heavy equipment. To prevent personal injury or equipment damage, use caution when handling

and transporting UPS cabinet and equipment.

PLEASE RECYCLE

The shipping materials are recyclable. Please save for later use or dispose of them appropriately.

1 2 3 4 5 6 7 8 9 10 ... 37 38

No comments

APC BC300 Series User Manual Page 5