APC BDP-95 User Manual download pdf (Page 60)

SETUP MENU OPTIONS

the TV or projector. If both are qualified, the player sends 3D video from its HDMI output

terminals, otherwise only 2D video is sent out. Active shutter 3D-compatible glasses (which

are not sold by OPPO Digital, Inc.) are required to enjoy the 3D movie on your TV.

• Off – Always output 2D video format, even when 3D video exists on the disc. This

guarantees the video quality if your TV is not 3D compatible, or some necessary part (such

as the 3D glasses) is missing.

4. 3D TV Size: To enter the diagonal screen size of your HDTV. This option applies to 3D mode,

to help the player adjust the 3D image for better visual quality.

• Use the number buttons on the remote control to enter the actual diagonal size of your TV

screen, or use the DOWN ARROW button to delete the digits. The default is 46 inches.

5. TV Aspect Ratio: To set the aspect ratio of the player’s output image. The options are:

• 4:3 Letterbox – Choose this when the display is standard 4:3. A widescreen image is

displayed in “letterbox” format with black borders on top and bottom.

• 4:3 Pan & Scan – Choose this when the display is standard 4:3. A widescreen image will

be stretched.

• 16:9 Wide – Choose this when the display is widescreen 16:9. 16:9 materials will be

displayed in its native aspect ratio, and 4:3 materials will be stretched horizontally.

• 16:9 Wide/Auto – Choose this when the display is widescreen 16:9. 16:9 materials will be

displayed in its native aspect ratio, and 4:3 materials will be displayed with black borders on

both sides in order to maintain the original 4:3 aspect ratio.

For a detailed description on how to choose a proper TV Aspect Ratio, please refer to the

Determine the Display Aspect Ratio

section on page 25 of this manual.

6. TV Sy

stem: To choose the output video system or broadcast standard (PAL/NTSC) to match

the type of TV. The options are:

• NTSC (default) – When playing NTSC-encoded discs, no system conversion is performed.

PAL-encoded contents are converted to NTSC output. Blu-ray Discs encoded with 24Hz

frame rate are converted to 60Hz frame rate if neither 1080p24 Output nor Source Direct

output resolution is enabled.

• PAL – When playing PAL-encoded discs, no system conversion is performed. NTSC-

encoded contents are converted to PAL output. Blu-ray Discs encoded with 24Hz frame

rate are converted to 50Hz frame rate if neither 1080p24 Output nor Source Direct output

resolution is enabled.

• Multi-system – No system conversion is performed. The output video system is the same

as that encoded on the disc. Blu-ray Discs encoded with 24Hz frame rate are converted to

60Hz frame rate if neither 1080p24 Output nor Source Direct output resolution is enabled.

Requires a TV that supports both NTSC and PAL systems.

NOTE

DO NOT select “Multi-system” if your TV does not support both NTSC and PAL systems.

The TV display may become a black screen upon inserting a disc encoded in a different

system than your TV supports. Should this happen, you can press the OPEN button to eject

the disc tray, and then use the Setup Menu to correct the “TV System” setting.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 92 93

Comments to this Manuals

No comments

APC BDP-95 User Manual Page 60

Comments to this Manuals